I. Product Overview

Our factory specializes in precision stamping and integrated elastic metal clamping strips, which are formed by continuous stamping and multiple bending from a single sheet of metal without any need for welding. Relying on mature standard molds for mass production, the clamping arc angles are precise and uniform. The workpieces are treated with quenching and tempering processes, perfectly balancing structural hardness and resilience. Even after long-term and repeated opening and closing, the clamping strips maintain ample elasticity and securely hold objects without slipping or loosening.
Available in various elastic metal materials such as stainless steel, spring steel, phosphor bronze, etc., combined with various electroplating and anti-corrosion surface treatments, offering excellent rust and wear resistance. Standard sizes are in stock, and thickness, bending angle, opening arc, and overall shape can be customized according to customer requirements. Widely used in equipment holding, positioning, and conductive fixing applications. Both small batch samples and large-scale export orders are accepted. The production process adheres to the ISO9001 quality management system inspection.

Section Two: Core Highlights of Craftsmanship

1. The entire steel plate is bent and formed as a whole, with a seamless integrated structure.
   The entire process is formed in one go through continuous stamping and bending, featuring no welds or seam gaps in the structure, even distribution of stress, and will not break at the bending points. The lifespan of the spring clip is significantly longer than that of assembled buckle parts.
2. Professional quenching and tempering heat treatment, elastic and durable stability
   After quenching and tempering treatment, the material's internal microstructure is optimized, with even and durable resilience. After tens of thousands of opening and closing clamping cycles, it remains resilient without deformation, maintaining consistent clamping tightness.
3. Precision control of clamping arc, good wrapping fit
   Standardized mold pressed arc sockets with regular and smooth curvature, tightly fitting around pipes, rods, and accessories, evenly distributing force, and unlikely to cause local slippage or damage to workpieces.
4. Edge deburring with fine treatment, safe and non-damaging to workpieces
   All bending ports and cutting edges are deburred and polished to be smooth without sharp corners, ensuring no scratches on the surface of the fixed objects during the clamping process for plastics, metals, and wires.

Section 3: Optional Customizable Raw Materials

1. Spring Steel (65Mn): Mainly recommended for general use
   Optimal elasticity, high cost-performance ratio, strong rebound force, preferred for equipment holding clips and mechanical positioning springs.
2. 304/316 Stainless Steel
   Highly resistant to rust and corrosion, suitable for damp environments, outdoor equipment, and kitchen and bathroom appliances, with no rust after long-term use.
3. Phosphor Bronze
   Excellent conductivity + inherent elasticity, suitable for electrical conductive springs, switch contact terminal holders.
4. Cold rolled iron sheet
   Low cost, suitable for ordinary fixed clips in dry indoor conditions.

4. Optional Surface Corrosion Treatment

• Galvanized: Basic anti-corrosion, cost-effective, suitable for general indoor mechanical clips.
• Nickel Plating: Double enhancement of rust prevention and wear resistance, fine appearance, precision spring preferred for electrical applications.
• Mirror polishing: Smooth and beautiful, for decorative + precision instrument accessories.
• Passivation: Retain the original color of the metal, enhance the salt spray corrosion resistance of stainless steel

Chapter 5: Applicable Application Scenarios

✅ Electrical and electrical accessories: power switch elastic contact, wire clip, circuit board fixing spring clip
✅ Pipe and pipeline fixation: thin steel pipe, plastic pipe clamp spring, pipeline limiting clip
✅ Precision instrument equipment: Internal part positioning clamps for testing instruments, small component fixing spring clips
✅ Industrial Fixture: Assembly fixture positioning clips, hardware fixture elastic pressure plates
✅ Daily Use and Kitchen & Bathroom Hardware: Kitchen & Bathroom Accessories Clips, Small Appliances Elastic Clamp

Six, Core Product Advantages

1. Standard molds are in stock with ample reserves, ready for quick shipment upon order, no need to wait for mold opening.
2. Elasticity adjusted through heat treatment, moderate tightness, does not relax or permanently deform over time.
3. Thickness, opening size, bending shape, and total length can all be customized as required.
4. Material and surface processing can be freely matched to meet various needs such as conductivity, rust prevention, and high strength.
5. Each batch is inspected for elasticity, size, and appearance at the factory, ensuring high consistency of bulk products.

Chapter 7: Common Procurement FAQs Q&A

Q1: Can production be replicated by providing physical samples without drawings?
A: Sure, support for physical sample mapping and mold making, 1:1 replication of shape and elasticity parameters, priority for small batch trials.
Q2: Can standard stock be purchased in small quantities? How long is the delivery time for customized orders?
A: Standard specifications are available for spot purchases; non-standard customized samples take 3-5 days, bulk orders 7-12 days, and urgent orders can negotiate to shorten the production time.
Q3: Can the elasticity be adjusted to be either greater or softer?
A: Can precisely control the rebound force by adjusting the thickness of the sheet material, selecting different materials, and modifying the bending radius.
Q4: What material is recommended for long-term use in outdoor humid environments?
A: Recommend 304 stainless steel material + natural passivation treatment for the best rust and moisture resistance.